• The Leading UK Supplier of

    DDA Handrail Systems

    Modular designed, non-discriminatory DDA handrail system adjustable to suit almost any scenario!
    UK Supplier for the Education sector
DJI_0858.1.jpg?w=1024&h=768&scale
key-clamp-1.jpg?w=1024&h=580&scale

It’s vital that your premises are safe, accessible and compliant with Disability Discrimination Act (DDA) regulations. Our DDA handrail systems are the smart one-stop solution. Secure, tailored to your premises and easily assembled with an Allen key – no need for an onsite welder – DDA handrail systems keep sites from schools to medical centres safe and running smoothly.

DDA regulations are stringent, but as an experienced DDA handrail supplier, when you order from Ezi Klamp, you can rest assured that your DDA handrail design ticks all the boxes. From the continuous 42mm diameter handrail to the high-visibility polyester powder finish and not-cold-to-touch feel, our DDA handrail systems keep your premises compliant, now and into the future.

Ordering your DDA handrail system from Ezi Klamp couldn’t be easier. We can work with a rough sketch of your site dimensions, quote you fast, then gather the DDA handrail fittings at our UK warehouse for prompt delivery. It’s all part of a service rated 9.4/10 positive by our loyal customers.

CLICK LINK BELOW TO DOWNLOAD PDF LEAFLET

DDA Handrail System

  • DDA-1 Elbow

    DDA-1 Elbow

  • DDA-1 Elbow

  • DDA-2 Wall End Return

  • DDA-3 Post Bracket

  • DDA-4 Post End Return

  • DDA-5 Inline Swivel

  • DDA-6 Wall Bracket

  • DDA-7 Split Elbow

  • Key Clamp 101-4 Short Tee

    The 101-4 Short Tee is a required fitting for DDA handrail. 2 of these fittings are needed per post.

     

  • Key Clamp 131-3 Wall Flange

    The key clamp 131-3 Wall Flange is used where positional fixing is required, typically used where rail meets a wall. Please note that this fitting is not designed for use as a base plate to support a handrail, guardrail or other structure – the 132-4 Base Plate should be used instead.

     

     

  • Key Clamp 132-4 Base Plate

    The 132-4 Base Plate is one method for fixing the handrail, this is used when fitting posts to a flat surface. There are other methods for fixing post also.

     

  • Key Clamp 146-4 Palm Fitting

    The 146-4 Palm Fixing is a fitting which enables the post to be fixed to the side of a wall.

     

  • Key Clamp 150-3 Internal Joiner

    The 150-3 key clamp fitting is a straight internal joiner for connecting two tubes of the same diameter. Can only be used with the standard 3.2mm wall thickness tube we supply. It is a required fitting for meeting DDA handrail requirements. 2 X DDA rings are required with each fitting to make a smooth, comfortable joint.

     

  • Key Clamp 184-4 Metal Cap

    The 184-4 metal cap is a galvanised plug to stop off open ended tube. This is often required for DDA style handrails to close the end of the posts.

  • Key Clamp 232-4 Ramp Base Plate

    The key clamp 232-4 Ramp Base Plate can be used on a slope or ramp of 0-11°. Fixing holes are of sufficient diameter to give a good fixing with either a mechanical or chemical anchor. The two grubscrews in the vertical socket give greater stability to the upright.

  • M10X300 STUD SETS

    If you are fixing your handrail to a wall, concrete surface or other hard surfaces, then this is a way of fixing to ensure a sturdy handrail.

  • M6X75 CSK SCREWBOLT

    This fitting is commonly used to fix 131 wall fitting. There is 4 bolts required per wall fitting.

  • Blue Circle Postcrete 20kg

    POSTCRETE

  • POSTCRETE

    We also provide postcrete, if you want to have your handrail concreted in, then we have the solution to do this!

  • Rubber Gap Washer

  • Tek Screws

    TEK SCREW

  • TEK SCREW

    The Tek screw is a simple method for fixing handrail.

Frequently Asked Questions

  • What is DDA Handrail?

    DDA Handrail is non-discriminatory handrail / balustrade system that must be provided on access to all public & commercial buildings where there are stairways and ramps.

  • What defines a DDA Handrail?

    DDA Handrails and balustrades can appear in many formats, however there are a number of factors which determine if a handrail is DDA compliant, such as –

    Continuous Handrail – DDA Handrails must have a continuous smooth finish with no protruding joints or fittings.

    42mm Diameter Handrail Size – DDA Handrails must be 42mm diameter for easy grip.

    Not-Cold-to-Touch – Our DDA Handrails are Polyester Powder Coated to meet the ‘not-cold-to-touch’ requirement as stated in regulations.

  • Is DDA warm to touch?

    No.

    DDA requirements state that handrails and balustrades should be ‘Not-cold-to-touch’. This requirement is satisfied by our polyester powder coating service.

  • What are DDA regulations?

    The Disability Discrimination Act (DDA) is designed to eliminate discrimination against disabled individuals. This law serves as the backbone for creating inclusive public spaces, ensuring that everyone, regardless of physical or sensory limitations, has equal access to essential facilities.

    While the DDA covers a broad spectrum of accessibility features, it emphasises architectural elements that people interact with most frequently. This includes ramps for wheelchair access, lifts with audio and tactile qualities for those with visual or auditory impairments, and handrails.

  • What colours do DDA Handrails come in?

    We can powder coat your DDA Handrail in any standard RAL colour. a range of RAL colours can be seen on ralcolorchart.com

  • Do you have CAD drawings?

    No, but we can supply data sheets and technical information if needed.

  • Can Ezi Klamp provide a full DDA Handrail installation?

    Yes, we can! DDA Handrail is commonly fitted by our installation team. One of our recent projects completed by our experienced installers was at Matthews Green School.

    If you’re unsure about anything, don’t hesitate to get in touch with us any time to discuss your project requirements. We’re here to help.