The 128 Top Corner GRP fitting is a 3-way, 90° elbow, typically used to join an upright post to the top rail of a GRP handrail on a 90° corner. Often used with the GRP-116 Mid Corner. 

The GRP 129 is a 30° tee fitting, often used in a staircase GRP handrail or guardrail.

The GRP 130 fitting is a 30° Cross, often used to connect the midrail to intermediate posts in a staircase GRP handrail. 

The GRP 132 Base Plate is a base flange with four fixing holes, used to fix down the upright posts in a handrail or guardrail.

The 145 Wall Socket is a GRP Fitting designed for side fixing GRP handrails or guardrails to walls, ramps and steps.

The GRP 167 Double Swivel is a versatile swivel fitting, used where angles vary on slopes, steps and landings. 

The GRP 173 Single Swivel is a versatile swivel fitting, used where angles vary on slopes, steps and landings. 

We will include the necessary fixing bolts and adhesive in your quotation so you’ve got everything you need to install your GRP handrail securely. 

Our GRP Kickplate is 100mm wide, with a 5mm wall. It is stocked in 5m lengths but can be cut to length if required.

Our height restriction barriers can be installed into premises to help deter larger HGVs or LGVs from entering the area.
These barriers serve as a warning to the drivers of these vehicles that they should not enter the area and that the way forward is intended for smaller vehicles only.
These height restriction barriers are used in the likes of warehouses, multi-storey car parks and more.
Quick and easy to install the barriers will serve an excellent purpose and will provide service for a
long time.
This Height Restrictor provides an ideal solution for the prevention of access to unauthorised areas such as staff car parks or underground low-level car parks.

The nudge bar on the barrier allows you to restrict the height of vehicles that enter your work site. It can be adjusted to suit your needs.

Available sizes of bar: 2000 mm, 4000 mm, 6000 mm

Ezi Klamp’s 101 Short Tee is an excellent option for your handrail project, usually used for connecting tubes safely and securely at a 90° angle. It is most often used to connect upright rails with horizontal top rails, or mid rails to end vertical rails on straight or level handrails and guardrails.

This key clamp is a reliable, sturdy fitting, and is available in 5 different sizes, all of which correspond with our steel tube options to give you a neat, robust handrail.

As with all our products, Ezi Klamp has stock of the 101 Short Tee readily available at our warehouse in Bristol for speedy delivery, ensuring your project continues to run smoothly.

The 101-4 Short Tee is a required fitting for DDA handrail. 2 of these fittings are needed per post.

The 104 Long Tee is a 90° connection fitting, ideal for connecting vertical posts to the top rail of a straight and level guardrail or handrail. It is weather resistant and strong, and this clamp fitting can be used where two lengths of tube need to be joined together within the top of the fitting.

As with most of our key clamp fittings, the 104 Long Tee is available in 5 different sizes, correlating with our tubing options.

Ezi Klamp always holds stock of this fitting and guarantees fast delivery so that you can keep your project on track easily and efficiently.

This 90° corner joint is specially designed for use in a handrail or guardrail to continue the midrail along around a 90° corner. In addition to this, it can be used to build quadrangular structures.

The upright tubing passes vertically through the 116 Midrail Corner and is often used with the type 128 Top Corner. This key clamp is available in 5 different sizes.

Ezi Klamp keeps a good stock of the 116 Midrail Corner at our Bristol base, and will deliver faster than rivals to ensure your project runs smoothly.

The 119 Midrail Cross key clamp is a 90° joint, most often used to connect a midrail to an intermediate vertical post in either a straight or level handrail or a guardrail, with the upright tube passing up through the fitting.

As with most of our key clamp fittings, this product is available in 5 separate sizes, allowing you to use the one that will suit your project best.

There is always availability of the 119 Midrail Cross joint at out Bristol warehouse, and we offer fast delivery so that you can progress easily with your project.

This key clamp is designed for use with a handrail at the top of a staircase or any other decline, joining the top rail to an upright post at an angle that is variable between 40° and 70°.

It is a safe and stable option to keep your handrail safe and secure and is available in sizes 2-4 to suit your project.

Ezi Klamp always has supply of the 123 Acute Angle Elbow in stock at the warehouse in Bristol and delivers fast to give your project the best chance of progressing quickly and easily.

The 124 Variable Elbow angle joint fitting is often used at the bottom of a handrail on a staircase or other decline, and is variable between 105° and 165°, joining the top rail to a vertical post. Key clamp fittings are an efficient way of continuing railing without the need for welding.

The 124 Variable Elbow joint is an excellent option to complete a handrail along with our other fittings and tubes and is available in sizes 2-4.

At the Ezi Klamp warehouse in Bristol, we always keep high stock levels of this joint, enabling us to supply you quickly and efficiently so that your project can advance.

This elbow joint is a 90° angle fitting often used on either straight or level handrails or guardrails, usually connecting the top rail to the vertical post at the end of a run of railing.

As with a lot of our key clamp fittings, this elbow is available in 5 different sizes to be fitted onto our high-quality tubes.

Our team of experts at our warehouse in Bristol always keeps a good stock of products and will dispatch and deliver fast to help your project forwards.

This fitting is perfect for if your project needs a bit of flexibility. It is a versatile, in-line swivel fitting and can be adjusted to any angle that suits your project, from a minimum of 75°.

The 125H Swivel Elbow fitting is available in sizes 2-4 and can be best used with our high-quality tubing to complete your project.

This product is always kept in stock at Ezi Klamp’s warehouse in Bristol and can be delivered faster than our rivals whenever you want to order.

The 128 Three Way Top Corner is designed for where 3 posts meet in the corner of a structure, joining a vertical post to the top rail of a handrail on a 90° corner. It can be used in a handrail or guardrail, and to make corner joints in frames and other structures.

The 128 Three Way Top Corner is a sturdy, safe option for your handrail and is available in 5 different sizes.

All these sizes are kept in stock at the Ezi Klamp warehouse in Bristol, where our team of experts will be happy to help you, quickly and helpfully, with your requirement.

This key clamp is a tee fitting, designed for use on handrails or guardrails on a staircase or other decline. It is adjustable between 30° and 60°, offering you some versatility, but it is most often used on steeper descents.

The 129 Adjustable Short Tee 30-45° comes in sizes 2-4, all of which are always kept in good stock in our warehouse in Bristol.

Ezi Klamp will make sure your order is packed, dispatched and delivered quickly so your project runs smoothly.