The 165 Combination Socket is designed to join a horizontal carrying rail to an upright post, in addition to enabling the socket to take a horizontal tie across the section.

This fitting is available in sizes 1-5 as with a lot of our key fittings and can be used with our high-quality tubing to achieve an optimum handrail, guardrail or other structure.

This product is of course kept in good stock at our Ezi Klamp warehouse in Bristol and is ready to be shipped out and delivered quickly whenever you require it.

This key clamp fitting is a very versatile connecting fixture. It is often used in a handrail with angles that are awkward and hard to accommodate. The swivels are adjustable through 170°.

This product is available in sizes 1-5. It is made by combining a 167M and two 173F, which are supplied riveted together. The male and female parts can however be supplied separately too if needed.

The 167 Double Swivel is kept in stock at our warehouse in Bristol with next-day delivery to keep your project moving.

The 168 Corner Swivel is a very adaptable fitting, ideal for managing angles which could otherwise not be accommodated for. The swivels can move by up to 85° from the horizontal in either direction.

This fitting is a combination of a 168M and 2 173Fs, although these are again available separately if needed. The product is available in sizes 1-5.

Our warehouse in Bristol always has a good supply of this product in stock and your order can be delivered quickly so there are no delays to your project.

This swivel fitting is designed to fix an angled tube to a flat surface, often a wall. It is not designed to support an entire structure whether it be a handrail, guardrail or other, as a base plate.

The 169 Wall Swivel is a combination fitting, made up of 169M and 173F which can be supplied separately as required. The key clamp is available in sizes 1-5.

As always, a stock of the 169 Wall Swivel key clamp is kept at our warehouse in Bristol, enabling our team to deliver your requirements to you as fast as possible.

This fitting is typically used to attach weldmesh infill to a handrail or guardrail post, although it can also be used to attach other types of infill panel up to a thickness of 9.5mm.

The 170 Single Mesh Clip is available in sizes 1-5 so you can make sure you receive the best possible fit in your project.

Fast delivery is guaranteed as this fitting is always kept in stock at our warehouse in Bristol, so that we can help you complete your project smoothly.

The 171 Double Mesh Clip is primarily used for connecting weldmesh infill to a handrail or guardrail post, both sides of the post. It can also be used for other types of infill panel up to a thickness of 9.5mm.

This fitting is available in sizes 1-5 depending on the size of the tubing you are using for your project.

It is kept in stock at all times at our warehouse in Bristol, where our team of experts will be happy to help fulfil your order efficiently and quickly.

This fitting is an excellent choice if your project has some awkward angles. The swivel connects an upright post with an angled post and is adjustable through 170°.

This product is a combination of 173F and 173M and is supplied riveted together, although both parts are available separately. This item is available in sizes 1-5.

The 173 Single Swivel is always in stock at our warehouse in Bristol and ready to be delivered to you quickly and efficiently, so your project progresses smoothly.

The 173M Male Swivel is half of the 173 Single Swivel fitting. It fits together neatly with the 173F Female Swivel fitting to create a reliable, strong end product.

This fitting is kept in stock in our Bristol Warehouse in sizes 3, 4 & 5, and are ready for fast despatch by our team of experts so that your handrail project can continue easily.

The 173F Female Swivel works in conjunction with the 173M Male Swivel, each being half of the 173 Single Swivel fitting.

This fitting is available in sizes 2, 3 & 4, and are ready for despatch so that your project can be constructed quickly and easily.

This swivel key clamp fitting allows an angled post to be attached to an upright, in turn with a midrail attached to the upright. This fitting is often used when a sloping handrail joins a level section.

The 174 Swivel Step Cross fitting is available only in size 4. It should also be noted that a structure should not be built entirely using swivel fittings as this does not offer enough stability.

A good stock of this key clamp is kept at our warehouse in Bristol and can be sent and delivered to you quickly so that your project progresses with no delays.

This key clamp fitting is very versatile and is often used on staircases, ramps or any other slope where an angled handrail joins a level section.

This fitting is only available in size 4. A structure should not be built using only swivel fittings, as they will not provide sufficient stability to the structure.

The 175 Swivel Step Tee is always in stock at our warehouse in Bristol and our team will be happy to manage your order, sending it out for next-day delivery so your project can progress smoothly.

This fitting is designed to connect three rails to an upright, which passes through the tee. The other three horizontal rails join at 90° angles to the upright. It is often used in larger structures.

The 176 Side Outlet Tee is available in sizes 1-5 to suit your project.

This fitting is always kept in good stock at our warehouse in Bristol, so your order can be prepared and delivered efficiently and quickly to help your project forwards.

The 179 Locking Collar is a small fitting, typically used to provide structural support to another fitting on a structure that may have been left untightened. It can also be used to give extra support when the loading on a structure goes over the max. permitted slip load for a set screw.

This fitting is available in sizes 1-5 at our warehouse in Bristol. Here, our team of experts will be happy to fulfil your order and ensure it is delivered quickly so that your project continues to run smoothly.

The 182 Hook is a small fitting that fits onto an upright tube. It is commonly used to attach chains to a handrail or post but can also be used for the connection of netting and advertisement banners.

This fitting is available in sizes 1-4 and can be fitted onto our tubing to achieve a neat finish.

The 182 Hook is kept in stock all the time at our Bristol warehouse, meaning that your order can be sent out and delivered quickly so you can continue your project smoothly.

The 184 Metal Cap is an alternative to our type 133 End Cap, which is plastic. It can be used to stop off tubes as a drive-in component without the need for any adhesive.

This fitting is available in sizes 3 and 4.

It will always be kept in high stock at our warehouse in Bristol so that your order can be fulfilled quickly and easily, ensuring your project experiences no delays.

The 184-4 metal cap is a galvanised plug to stop off open ended tube. This is often required for DDA style handrails to close the end of the posts.

This interclamp fitting is usually used in conjunction with the 191 Roof Ridge Fitting to construct the roof of a building made from key clamp parts and tubing. This fitting allows for the roof to be built at around 30°.

The 185 Roof Eaves Fitting is available in size 4 only.

This fitting is always kept in stock at our Bristol Ezi Klamp warehouse and can be delivered to you quickly to ensure that your project remains on track.

The 191 Roof Ridge Fitting is often used alongside the 185 Roof Eaves Fitting to help construct a roof at an angle of approx. 30°. Like all of Ezi Klamp’s fittings, it is very stable and reliable, a perfect choice for your project.

This fitting is available only in a size 4.

Our warehouse in Bristol keeps a good stock of this fitting in the warehouse, and it can be delivered faster than our rivals to give you the best possible experience of dealing with us.

This weather cap is designed to fit over the 132 Base Plate to seal it tightly from harsh weather conditions. The fitting is secured to the upright post using a reliable sealant, which is also available separately.

This product, which is usually used on level roof guardrails to protect against water ingress, is available in sizes 2-4.

We keep a good stock of the 192 Weather Cowl available at our Bristol warehouse, and our team of experts are happy to help you with your order, ensuring it is delivered fast, so your project runs smoothly.

This double lugged fixing bracket is usually used for attaching any tube structures to various panels or boards. It is a safe and secure option and has the benefit of being almost flush for a neater finish.

The 198 Double Fixing Bracket comes in sizes 2-4.

This fitting is always kept in stock at our Bristol warehouse so that we can pack and dispatch your order fast so that your project continues to run smoothly.

The 199 Single Fixing Bracket is a single lugged fitting, often used for attaching tubing structures to any panels or boards. Similarly to the 198 Double Fixing Bracket it has the benefit of giving a nearly flush finish.

This fitting is available in sizes 2-4 to suit your project’s needs.

We make sure we always have a good stock of this fitting available at our warehouse in Bristol so that we can fulfil your order and deliver the goods as fast as possible.

This key clamp is a tee connection often used in handrails along a ramp or other shallow gradients to connect the upright posts to the top rail, or to connect the midrail to the end post.

The 201 Ramp Short Tee is available in sizes 2-4 and is adjustable between 0°-11°. It cannot be used where two lengths of tube meet in the middle of the fitting.

This tee fitting is always in stock at our warehouse in Bristol and can be dispatched for next-day delivery to ensure your project progresses quickly and smoothly.

This tee connection fitting is adjustable between 0°-11°, making it perfect for use on a handrail on a ramp or other light decline. This fitting can be used where two lengths of tube need to be connected within the fitting.

This key clamp is available in sizes 2-4.

As with all our products, the 204 Ramp Long Tee is always kept in good stock at our warehouse in Bristol, enabling us to deliver the goods quickly so that your project runs smoothly.

This key clamp fitting is used on the midrail of a ramp handrail or guardrail, attaching it to an intermediate vertical post.

The 219 Ramp Midrail Cross is an excellent, sturdy option for your handrail or guardrail, and is available in sizes 2-4.

This fitting is always in stock at our Ezi Klamp warehouse in Bristol and is readily available to be sent out and delivered as fast as possible so that your project runs smoothly.